Welcome!
» Log In
» Create A New Profile
Home
>
Thomas Dankowski Metal Detecting Forum
>
Topic
CZ-3D to CZ-70 Translation
Posted by Kurt-NE
This forum is currently read only. You can not log in or make any changes. This is a temporary situation.
|
CZ-3D to CZ-70 Translation March 07, 2007 05:25AM |
Registered: 17 years ago Posts: 22 |
If I was to treat the relic tone on the CZ-70 as a high tone, would it be comparable to the CZ-3D in the enhanced mode? Also, does the CZ-70 have the same depth capabalities as the CZ-3D?
Thanks, Tom and staff for all the great information that you have made aviailable to all of us. The dvd was great.
Best wishes,
Kurt-NE
Thanks, Tom and staff for all the great information that you have made aviailable to all of us. The dvd was great.
Best wishes,
Kurt-NE
|
Re: CZ-3D to CZ-70 Translation March 08, 2007 12:50AM |
Registered: 17 years ago Posts: 10,071 |
Hi Kurt,
The CZ-3D 'Enhanced' mode Vs. the CZ-70 'Relic' tone are not the same. The 'windows-of-conductivity' differ by a fairly large margin. ....And old nickels ID/read differently on 70 Vs. 3D. Both detectors (assuming correct calibration) ascertain identical depth capabilities; however, the CZ-3D has a stronger propensity to ID targets more correctly at the extreme depths.
Tom
The CZ-3D 'Enhanced' mode Vs. the CZ-70 'Relic' tone are not the same. The 'windows-of-conductivity' differ by a fairly large margin. ....And old nickels ID/read differently on 70 Vs. 3D. Both detectors (assuming correct calibration) ascertain identical depth capabilities; however, the CZ-3D has a stronger propensity to ID targets more correctly at the extreme depths.
Tom