Question regarding best freq. choice for the F75ltd2

I read Tom's post regarding this awhile ago and I remember him saying a depth loss can occur if the right frequency is not selected, even if no emi is present and all channels are quite.

I don't have a test garden to try this (apartment living) but if you go into all metal and choose the channel that gives the smoothest threshold do you think that would be the best channel to use?
Thanks,

HH
John

What I would do is check with a coin on top of clean ground. Start hunting. If you can find a target then use freq offset to see if signal can be improved. Person might want to dial the sens back over target to slight hit. Then see if freq offset will make the target sound better. Then dial sens back up and hunt.

John......... Yes. That is a (near) guarantee to work the best.

Thanks Tom,
That's what I'll do then.

HH
John

tnsharpshooter Wrote:
-------------------------------------------------------
> What I would do is check with a coin on top of
> clean ground. Start hunting. If you can find a
> target then use freq offset to see if signal can
> be improved. Person might want to dial the sens
> back over target to slight hit. Then see if freq
> offset will make the target sound better. Then
> dial sens back up and hunt.


Thanks, I think I'll try that too, just to verify if it matches up with the all metal threshold channel.
HH
John