Show all posts by user
This Open Forum is now DISABLE to new posts due to the "Phorum" Forum Software used for this forum being generally obsolete and basically no longer supported. Recently, the server that hosts this website upgraded to MySQL version 8.0.36 and Phorum 5.2.23 is not compatible with MySQL version 8.0.36. This Phorum based Discussion Forum will still be available for viewing and reference but is no longer accepting new postings and will be READ ONLY. To visit the NEW forum, CLICK HERE! Please note that those wishing to use the NEW Discussion Forum will have to re-sign up. Due to encryption of passwords, I cannot transfer users from the Phorum platform to the new forum platform. I am sorry for all the inconveniences. This Phorum based discussion forum will still be here for reference and veiwing, but will be closed for further posts.
This forum is currently read only. You can not log in or make any changes. This is a temporary situation.
1. The detector is off!
2. We lift to the search height the coil above the ground, in a place that is clean from metal and other purposes.
As an option, lift the coil above the ground to a height of 40-50 cm.
During the adaptation of the sensor, the coil is not movable!
3. Press and do not release the "+" button, turn on the power of the detector.
When the display shows "fr
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
woodchiphustler Wrote:
-------------------------------------------------------
> Still can't get it to tone. I suspect the Silver d
> ollar comes in at over 90?
What is the value of the Ground Phase after the sensor adaptation with the subsequent Ground Balance?
ps: "False Ground Signal Zone" and "Ground False Signal Filter" must be at zeros.
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
go-rebels Wrote:
-------------------------------------------------------
> Don’t CTX coils have the A/D conversion within the
> coil such that a digital signal is sent up the wir
> e?
+1
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Cal_cobra Wrote:
-------------------------------------------------------
> I'm actually a bit surprised that the EQX is runni
> ng a low end off the shelf general purpose 32BIT C
> ortex M3 CPU.
>
> ARM® Cortex® -M3 32-bit RISC core operating
> at a 72 MHz frequency, high-speed embedded memorie
> s (Flash memory up to 128 Kbytes and SRAM up to 20
> Kbytes),
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
I will leave here a proposal for Minelab and other manufacturers.
Apparently in the coil is the main computing module of the detector, and because of this, the prices for the coils will be high.
I would suggest that this very computational module be made removable so that it can be attached to various coils.
This would allow achieving:
1. Reduction of prices for coils (sensors).
2. Involve i
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
With the firmware upgrade and/or Signum upgrade I would recommend not to rush.
About the autumn of 18th year or a little later serious changes are expected.
But it also does not exclude the possibility of a new detector, like "mark 2" ...
original (ru):
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
signum MFD + firmware 2.06 + upgrade from Asgo + displacement of the Ground Balance in the negative (about two degrees) = ...
(Settings NOT factory!)
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Coil 6 "14 KHz.
A coin of 50 kopecks (ru) till 2006 of release, the Brass, diameter of 19 mm, a thickness of 1 mm.
In light soil at a depth of 43 cm (17 inch).
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
1. Combining VLF and PI technologies, that is, a hybrid version of the detector.
2. Simultaneous multifrequency (or variations of this topic).
3. Transition to fully digital processing of data using two ADCs, and without the use of ground phases as such.
4. IP68
5. Universality - the detector should be suitable both for beginners and professionals, and be adjusted to the requirements of the o
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
"..My forecast was brilliantly confirmed when I carefully
familiarized with the printed circuit board Racer 2!
The board is designed to operate at two frequencies simultaneously
(read: Fisher CZX)! But at the moment it is hardware and
software "cut" to work on one frequency!.."
"..Just before the very appearance of photos
PC board Racer 2, I sat and read the circu
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Question to Nokta (Dilek):
Engineers who opened the Racer 2 said that it had a possibility of working on two frequencies.
(This feature is present, but deactivated)
Is it so?
Should we wait in the upcoming novelty of work in the simultaneous dual frequency mode?
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
6 "the coil will be VERY in demand.
In Russia, many people are waiting for this particular coil, since larger coils miss a lot of targets on the trash.
Or is it that someone hopes that the Nox is magical and he does not need a spool on the trash?
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
At the spring event, when there was a presentation of Max, we compared a lot of detector models at the test site, including E-Trac and CTX 3030.
I'll try to say softer that I would not offend anyone, but there are detectors that work better than these models.
(It's about ordinary ground! Not strongly mineralized!)
If Minelab wants to say that the Nox will be weaker by most parameters
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
The Whites has every chance to continue the development of the V3i series using multifrequency, to become the leader among the manufacturers of MD, but ... they released MXS and MX7 ...
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
+1
At the current time, detectors do not allow accurate identification of targets, especially at great depths, so most treasure hunters:
1. Dig all the finds in those places where there are few signals.
2. Digging everything that is not "iron" in trash.
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
In such detectors ID will always jump, especially for oxidized targets.
If you want a good identification of targets, then you need a screen like CTX 3030, which will display expanded information about the target.
And to use only one VDI is nothing ...
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
I expect it to be a copy of the DPR 600, but using conventional coils and frequencies from Deus.
By the way, the price of the DPR 600 dropped just to $ 400
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Continuation of a story:
The expected release of XP Deus 2, a simplified version of the current XP Deus, is also wireless, super-light on the new shaft, support for HF, the price is not more than $ 400 ...
ps: no comment ...
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Alpha Goat Wrote:
-------------------------------------------------------
> The deep program will find Artillery shells and ca
> nnonballs from our various wars.
And this is the practical use of DP:
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
SuchMuch Wrote:
-------------------------------------------------------
> I must say majority of MFD users outside Russia ba
> rely use DEEP Mode
They just do not properly prepare it
Filter T = 1
Filter A = 4
GS Zone <= 4
GS Filter = Off
With these parameters, the detector works almost like for normal search, but it will give a clear signal in case if under the coil the
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
SuchMuch Wrote:
-------------------------------------------------------
> There are cyrillic letters in yr message, substitu
> te them.
>
> I have just tried to reply using cyrillic letters
> and got the same mistake
Yes, the text had two characters of another character set.
I copied one line from the Internet, and it was with a different encoding.
Replaced these two
by
vfp7
-
Thomas Dankowski Metal Detecting Forum