T2-C Vs G2+ on Ten Inch Dime (Video)

Sorry about the low light but it was late..

more talking than anything so not all is lost.

[www.youtube.com]

Keith

“I don't care that they stole my idea . . I care that they don't have any of their own”
-Nikola Tesla

Funny u say that u have a really hot G2+. I had a really hot f75 & f19 and couldn't stand them in the ghost town iron. Always wanting to overload on every little thing. Had to swing them like 6" off the ground it was so bad. Said I would never buy another FTP again. Few yrs later I bought a T2-Classic. It seems to be a normal one. Runs well in the iron, especially with the nel coils on. Told a friend of mine about the classic and how much I liked it in the iron. Ha ha ha should've guessed it, he musta ended up with a hot T2 cause he can't even get close to the ground either with his, just like my f75 and f19. Funny cause his f19 runs like my T2 in the iron, runs smooth. For anyone else that gets the hot machines I would recommend the nel coils, they seem to tame the machine down or focus the power more if that makes sense ha ha ha. Anyways wish I would of tried a nel coil on my f19, prob would of had a depth monster. Be interesting to see if a real hot t2 classic would hit that 10" coin of urs

Good report Keith

I had a nel hunter on my f19 and it was very poor on depth and separation, also thought the iron volume being set to 0-40 was a disaster on low conductors in iron.


Kickindirt Wrote:
-------------------------------------------------------
> Funny u say that u have a really hot G2+. I had a
> really hot f75 & f19 and couldn't stand them in th
> e ghost town iron. Always wanting to overload on e
> very little thing. Had to swing them like 6" off t
> he ground it was so bad. Said I would never buy an
> other FTP again. Few yrs later I bought a T2-Class
> ic. It seems to be a normal one. Runs well in the
> iron, especially with the nel coils on. Told a fri
> end of mine about the classic and how much I liked
> it in the iron. Ha ha ha should've guessed it, he
> musta ended up with a hot T2 cause he can't even g
> et close to the ground either with his, just like
> my f75 and f19. Funny cause his f19 runs like my T
> 2 in the iron, runs smooth. For anyone else that g
> ets the hot machines I would recommend the nel coi
> ls, they seem to tame the machine down or focus th
> e power more if that makes sense ha ha ha. Anyways
> wish I would of tried a nel coil on my f19, prob w
> ould of had a depth monster. Be interesting to see
> if a real hot t2 classic would hit that 10" coin o
> f urs

Keith how did the Impact on DEEP mode do on that 10" dime?

edit: Forgot to say with the stock 11" DD coil like the T2-C and F19 were using.



Edited 1 time(s). Last edit at 07/25/2017 04:33PM by Cal_cobra.

As noted earlier not a Big Fan of these type Detectors For My Type Hunting ,aka Deep Turf Coins.
But remember the F75 I bought when they first came out and It Did have that Fuzzy sound on Deep Coins like in the 9" Range.

ghound Wrote:
-------------------------------------------------------
> I had a nel hunter on my f19 and it was very poor
> on depth and separation, also thought the iron vol
> ume being set to 0-40 was a disaster on low conduc
> tors in iron.
>
>
> Kickindirt Wrote:
> --------------------------------------------------


ghound Wrote:
-------------------------------------------------------
> I had a nel hunter on my f19 and it was very poor
> on depth and separation, also thought the iron vol
> ume being set to 0-40 was a disaster on low conduc
> tors in iron.

Just curious what u are comparing it too? Sounds like u might of had something wrong with ur coil. My sharpshooter coil goes as deep as the stock 11", also air test the same as the 11" but separates better. In my ground anyways.

About the same Brian..

Keith

“I don't care that they stole my idea . . I care that they don't have any of their own”
-Nikola Tesla

I was comparing it to the Rutus that i was running at the same time, both cost the same new here, but in performance it was night and day, i put it down to the coil as most folk rated the F19 as a decent machine, i have a few videos i done at the time i'll post up.
> ghound Wrote:
> --------------------------------------------------
> -----
> > I had a nel hunter on my f19 and it was very poo
> r
> > on depth and separation, also thought the iron v
> ol
> > ume being set to 0-40 was a disaster on low cond
> uc
> > tors in iron.
>
> Just curious what u are comparing it too? Sounds l
> ike u might of had something wrong with ur coil. M
> y sharpshooter coil goes as deep as the stock 11",
> also air test the same as the 11" but separates be
> tter. In my ground anyways.

Here's one of the videos it's simply a coin 4" from an nail !


[youtu.be]

Man that is pretty sad, looks like the coin is plenty far away for that nail to be a non issue

Kickindirt Wrote:
-------------------------------------------------------
> Man that is pretty sad, looks like the coin is ple
> nty far away for that nail to be a non issue


Remind me to never buy one of those butterfly coils!