LONGER SHAFT FOR FORS / RACER / KRUZER

Dear Valued Members,

We got requests from customers for longer shafts for our devices.
Please note that we are now adding a longer middle shaft to our accessories line up that will be compatible with the Fors / Racer and Kruzer series.

The length of the shaft is 4 inches longer than the standard one included in the packages.

We hope this will satisfy the need of taller customers who have been asking for this.

The part number and pricing will be sent out to dealers tomorrow.

We apologize that it took us long to take action on this. As a matter of fact, all your requests / demands that we believe we can accomodate always stay in my notes but as you can understand, somethings take priority over others as the resources are not unlimited for any company.

Thank you!

Impact?

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Lawrenzo Wrote:
-------------------------------------------------------
> Impact?


Dear Lawrenzo, the second I posted this announcement, I knew you were going to ask this question:-)
Unfortunately, as the Impact cabling runs inside the shaft, we cannot just extend the middle shaft.
Such a change will also require all the coils to be changed.

Understood..not trying to create a problem I have a friend that is tall and my impact is not fitting him...he really loves the machine as I do that is why I keep sticking up for it. Thanks

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Did you guys/gals forward think this for the Anfibio? The Anfibio is planned to be my next detector purchase, but being 6'4" I always swing a tall man rod. I didn't know the Impact was that way, and since the Anfibio is based off the shaft design will the Anfibio also be that way?

I'm 6'2" and with the Impact shaft extended to no. 7 it reaches out just a little too far for me.

Extended to no. 6 1/2 is perfect.

My buddy is about 6'4''

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Lawrenzo Wrote:
-------------------------------------------------------
> Impact?


Why would you need a longer shaft, you're like 5'2", perhaps you meant to ask for a shorter shaft eh?

Lawrenzo Wrote:
-------------------------------------------------------
> Impact?


Why would you need a longer shaft, you're like 5'2", perhaps you meant to ask for a shorter shaft eh? I said it was for a friend not for me?

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Lawrenzo Wrote:
-------------------------------------------------------
> Understood..not trying to create a problem I have
> a friend that is tall and my impact is not fitting
> him...he really loves the machine as I do that is
> why I keep sticking up for it. Thanks


I know you have no bad intentions... just wanted to have a little smile after a loong day! I know you like your Impact and we truly appreciate it.

How come you can't have iron vol on all metal???? The gen program? That would be all I really want?

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Impact Iron Volume x2 Dilek.

She said she wanted to hear what we wanted...So lets not abandon the Impact just yet. Show us you do care. I think a lot of us want that and please don't offer it as a software update on your new machines and not the impact. The impact is not that old and is one of your best machines in the line if one knows how to use it!

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Lawrenzo Wrote:
-------------------------------------------------------
> How come you can't have iron vol on all metal????
> The gen program? That would be all I really want?


You mean the Gen Delta mode, correct?

For the Impact, a thought

Tall man's lower rod and or middle rod.
An optional extension patch search coil cable.

DeepTech Vista X with 3 search coils.
Works for me

On the face plate it is the top middle Gen mood that I would like to see iron vol used

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!