Show all posts by user
This Open Forum is now DISABLE to new posts due to the "Phorum" Forum Software used for this forum being generally obsolete and basically no longer supported. Recently, the server that hosts this website upgraded to MySQL version 8.0.36 and Phorum 5.2.23 is not compatible with MySQL version 8.0.36. This Phorum based Discussion Forum will still be available for viewing and reference but is no longer accepting new postings and will be READ ONLY. To visit the NEW forum, CLICK HERE! Please note that those wishing to use the NEW Discussion Forum will have to re-sign up. Due to encryption of passwords, I cannot transfer users from the Phorum platform to the new forum platform. I am sorry for all the inconveniences. This Phorum based discussion forum will still be here for reference and veiwing, but will be closed for further posts.
This forum is currently read only. You can not log in or make any changes. This is a temporary situation.
rustic charm Wrote:
-------------------------------------------------------
> I would like to see a comparison between the New I
> mpact & the latest flagship from the US, Whites MX
> S
>
> Of course asides from the MXS being waterproof, wi
> ll it preform better than the Impact when it comes
> to hunting in trash & depth, recovery etc?
>
> This woul
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
tabman Wrote:
-------------------------------------------------------
> Keith, I'm not that impressed hunting around nails
> with DD search coils. Lucky for me, I have fairly
> mild ground to detect in and don't have to use the
> m!
>
> V
> ideo Link
>
> tabman
The average sum signal from the nearby objectives ...
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
ghound Wrote:
-------------------------------------------------------
>
>
> Someone needs to send this guy an Impact for testi
> ng behind his Deus!
Deus in heavy iron (coil 11")
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
How to behave in the detection zone of the sea?
How will he react to the waves of the sea?
It can spoil the detector from the spray of the waves?
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Can I see a video the Nail Board test with a sniper coil?
Can I see a video comparison with the depth Racer 2?
Is it possible to see video of the detector work in the area of the sea?
What level of water protection at the detector?
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Is there a "hot key" to change the frequency?
What would be possible to quickly change over the target frequency and double-check it on a different frequency.
For example, oxidized iron by changing the frequency will show very different VDI
And another question - what class of water protection at Impact?
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
tnx
I do not hesitate to say that the most important question - is it possible to replace a single keystroke frequency?
Need GB when you change the frequency?
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
IMHO, it's simple to ugliness.
discrimination depth is simply filter the signal level for discrimination.
If the signal exceeds the threshold level, then it works out discrimination, if not - it does not work out ...
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Show with GM5 + Nail Board test, plz, preferably in a mode of "all metal" with disabled discrimination and show the display of the detector.
If you have a choice then with a small coil
Thank you in advance
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Forgot to add that the MFD and the new MFT (FW 2.05 and higher) is very different from the old MFT (1. *).
We can say that this is different detectors, firmware 2.05 and newer 2.06 compared to 1. * has made a lot of changes.
In addition, Signum Pro recommend using the upgrade version from Sergey Asgo.
The main difference between an upgrade - fine-tuning of the detector sensitivity under the cu
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Diggs4ever Wrote:
-------------------------------------------------------
> I have tested shifting frequency in the plus direc
> tion to possitive effect in harsh mineralized grou
> nd. Has anyone else ever dived into this? If so fi
> ndings?
This is sure to Signum when working on heavy ground.
The fact that you are now using a detector operating at the peak of the resonance
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
By creating a standardized rating system detectors it is likely that producers will start their new models optimized only for this test and ignoring the actual search terms ...
ps: a good idea but it is important not to make a mistake by creating such a system.
For example there are detectors that pass Nail Board Test but rather a coin drop below the level of nails, the detector will no longer
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
A very controversial point about the frequency of choice for heavy salty ground.
On the one hand it is desirable to use a high frequency, especially in the case of gold-containing search findings.
On the other hand the high frequency of very poor work in such conditions - causes phantoms and greatly reduced detection depth.
Incidentally fixedly frequency range related to the size of the coil,
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Very good that comfortable with the Signum.
When you start to look for this detector to the "trashcan", then use the coil Nel Snake. ( Nel Snake for AKA )
Request distributor Nel coils with a frequency of 7 kHz and 10 kHz and compare their work on this the ground.
/ I used Nel Snake 10 kHz /
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
IMHO, Deus coil is calibrated initially and within themselves.
Coil + Unit + Headset is the similarity of the cluster in the computer world.
That is, they act as modules that can be different in functionality but also overlap each other by some functions.
Unit 3.2 + Headset 2.0
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
An example of failure of the detector if the coin below the iron level:
/ Focus on the hodograph! Coil AKA 6" 14 kHz /
Example masking signal
Although this test is Nail Board detector passes:
Nail Board
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Suffice it to impose on an existing test Nail Board the opportunity to deepen coins.
It's enough to place nails on a transparent plexiglass plate and precisely to raise over a coin. (Or lower coin, no difference)
You can complicate the test by creating rectangles of plastic or similar containers height of 1 cm and filling them with ground.
These containers with soil underlay under the pla
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
diggers Wrote:
-------------------------------------------------------
> According the UK dealer plus all the others parts
> that are due ..No idea on prices as yet
Hm ...
£349.95
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
IMHO, interesting option quickly and easily change the search mode.
For example:
When looking deeper purpose comes with the controversial signal - switches on the depth mode and recheck the goal.
Another option when the field comes "Brownie spot", the place where once was a house with a large concentration of waste - switches to the mode "trash" and check this patch of land
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
There is a very simple options
Plastic rectangular containers filled with soil and are laid out test cube for a 3D test as close to real conditions.
Photo of the container for a sample:
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
hastings Wrote:
-------------------------------------------------------
> The new AKA Intronik STF is much deeper than Sign
> um.
If you give a link to the store where it can be bought, it would be very good ...
by
vfp7
-
Thomas Dankowski Metal Detecting Forum
Automatic speed adjustment GB only affects the speed of adjustment of the detector.
The border adjustment about two degrees
On light ground Signum works very deeply, for that some filters are turned off in the settings and reduced coil wire speed.
You need headphones and it is desirable to learn to use the RT channel.
by
vfp7
-
Thomas Dankowski Metal Detecting Forum