INSIDE NOKTA & MAKRO DETECTORS

Dear Valued Members,

For those who are curious about our company and team, here is a video about Nokta & Makro Detectors, enjoy!

[www.youtube.com]


Dilek Gonulay
Sales & Marketing Manager

Very nice video Dilek.

I enjoyed it.

David

Look closely to 3:00 - is this Nokta Storm?





Edited 1 time(s). Last edit at 10/10/2017 01:15PM by vfp7.

oh no...here we go LOL

Forget the storm, the new racer at 3:06-3:07 is more interesting to me and appears waterproof. But they have already told us they are working on waterproof units so no surprise. Interesting video. Quite a bit "cleaner" looking operation than some US factory videos.

Dilek, do expect simultaneous multifrequency in new products?



Edited 1 time(s). Last edit at 10/10/2017 02:05PM by vfp7.

Good work Dilek. Right direction. Thank you for video.

A tremendous company promotional video very professionally produced,just one slight observation that could be seen as a slight oversight was at the 4.55 minute mark regarding 'Quality at International Standards' certificates etc as they did have some issues with plastic components about 12-18 months back of failure of coil case lugs and bolt etc,but it appears that is behind them.

Interesting and insightful video Dilek,

looks like a great company to work for and fun too

Great Video Dilek!!

I love that everything is modern and state of nents art!!!

looks like everything is Done in house too..

The electronics from what I've seen inside the boxes is TOP Notch components and very much Micro and modern circuits..

Nice tets garden..That really caught my attention!!

I think people are going to have a new INSIGHT as time passes!!

Keith

“I don't care that they stole my idea . . I care that they don't have any of their own”
-Nikola Tesla

So Keith, ..Christmas is right around the corner and you gave an early present/hint like when the Impact was soon to be revealed and now you have me paying close attn to your post especially this time of the year,...all caps on the word insight?....HMMMMMM!...sooooooo!....what is the "INSIGHT"???

Very professional. You have a beautiful factory/shop....high tec to boot, thanks for the inside look.

Now we know----thanks for a well done presentation of your company.

Very professional looking business, wonderful video. You can tell its a company where employees take pride in what they do. It shows in their products high quality and customer service.
Impressed and more than happy with my Impact!!!

DeepTech Vista X with 3 search coils.
Works for me

Very Impressive high tech company. We're going to see a lot from this company.

Rick

Thank you for the video Dilek, nice factory.

Another great looking video from the brilliant Nokta/Makro - thanks Dilek

There workshops are a breath of fresh air compared to some of those old and tired manufacturers

I cant wait to come over for a look myself

Well done guys - Professional in every respect -

VincentNz

[www.earthscan.co.nz]

Wow! Stunning!

Now........ with some 'people' photos........ who-is-who? Can you tell us which one is you, Alper..... and some others?

nice!

vfp7 Wrote:
-------------------------------------------------------
> Dilek, do expect simultaneous multifrequency in ne
> w products?

And the answer is in some - yes, in some- no. Why? Because there is a different ''taste'' to each of them for the customers. Designing a metal detector and selecting the parameters is a give-n-take situation in terms of what you are offering to the customer.

You can take the same carrots and use it in a salad or roast it or put it in a cake... and the carrot will have a different taste to it so to say...so we will continue to offer choices for our valued customers and let them decide on the ''taste''.

Hope I could make myself clear...

NASA-Tom Wrote:
-------------------------------------------------------
> Wow! Stunning!
>
> Now........ with some 'people' photos........ who-
> is-who? Can you tell us which one is you, Alper...
> .. and some others?


Well, in the last picture in front of the building: the tall guy in a gray jacket and in the middle is the owner... I am standing on his right.. on his left, is the VP for Project development... Alper is the blond guy standing all the way to the right in the light blue jacket...

Hi Dilek,

Thanks! I see you, the owner....and the VP. . . . . . but I'm still looking for the blonde guy (Alper) in blue jacket. Is he the one wearing a sweater with 2 blue diamonds (vertically).... beneath the blue jacket?

NASA-Tom Wrote:
-------------------------------------------------------
> Hi Dilek,
>
> Thanks! I see you, the owner....and the VP. .
> . . . . but I'm still looking for the blonde guy (
> Alper) in blue jacket. Is he the one wearing a swe
> ater with 2 blue diamonds (vertically).... beneath
> the blue jacket?


Correct!

You can also see Alper on video doing air tests with a Racer 2 on this video:

[www.makrodetector.com]

Loved it. Thanks Dilek!

Junk and Disorderly Wrote:
-------------------------------------------------------
...just one slight observation that
> could be seen as a slight oversight was at the 4.5
> 5 minute mark regarding 'Quality at International
> Standards' certificates etc as they did have some
> issues with plastic components about 12-18 months
> back of failure of coil case lugs and bolt etc,but
> it appears that is behind them.


Sh!t happens. I worked for the largest networking company in the world, and I ended up orchestrating a ten million dollar recall notice because one of the vendors changed their component wash procedure, and it caused a significant problem in some high speed memory components, which created "electrical whiskers" that would cause the chips to malfunction. This company (which shall remain un-named, but is likely obvious) and it's manufacturing facilities, has about every standards certification you could imagine, but things still happen. It's life. The important thing is how the situation is handled. White's clearly tried to sweep all the MXS issues under the rug when people were reporting the problems, and finally after public outcry, they apparently rectified the issue. Makro/Nokta have not ever once IMHO tried to pull the wool over anyone's eyes, actually they've done quite the opposite and their customer service is second to none from my experience.



Edited 1 time(s). Last edit at 10/13/2017 06:43AM by Cal_cobra.

Cal_cobra Wrote:
-------------------------------------------------------
> Junk and Disorderly Wrote:
> --------------------------------------------------
> -----
> ...just one slight observation that
> > could be seen as a slight oversight was at the 4
> .5
> > 5 minute mark regarding 'Quality at Internationa
> l
> > Standards' certificates etc as they did have som
> e
> > issues with plastic components about 12-18 month
> s
> > back of failure of coil case lugs and bolt etc,b
> ut
> > it appears that is behind them.
>
>
> Sh!t happens. I worked for the largest networkin
> g company in the world, and I ended up orchestrati
> ng a ten million dollar recall notice because one
> of the vendors changed their component wash proced
> ure, and it caused a significant problem in some h
> igh speed memory components, which created "electr
> ical whiskers" that would cause the chips to malfu
> nction. This company (which shall remain un-name
> d, but is likely obvious) and it's manufacturing f
> acilities, has about every standards certification
> you could imagine, but things still happen. It's
> life. The important thing is how the situation is
> handled. White's clearly tried to sweep all the M
> XS issues under the rug when people were reporting
> the problems, and finally after public outcry, the
> y apparently rectified the issue. Makro/Nokta hav
> e not ever once IMHO tried to pull the wool over a
> nyone's eyes, actually they've done quite the oppo
> site and their customer service is second to none
> from my experience.

EXACTLY - Great Post

[www.earthscan.co.nz]

I'm still on black flag email list in /whites company... they didn't answer on my emails still. I was found some problems in MX Sport software... so when my V3i die I need to buy new one. They don't repair it.

Shelton Wrote:
-------------------------------------------------------
> I'm still on black flag email list in /whites comp
> any... they didn't answer on my emails still. I wa
> s found some problems in MX Sport software... so w
> hen my V3i die I need to buy new one. They don't r
> epair it.

I am just relieved that you haven't been added to the Clinton Hit list by now - lol

[www.earthscan.co.nz]

Great video and insight to the company. I remember when you were just starting out in the states and now look at you. I don't think any other company is moving as fast as you are..they all have stalled while I would expect you are winding up for a few new units to sell

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!