pole locking pads on cz7 same as cz 3d?

Hi guys, anyone know if the pole locking pads on the old CZ7 are the same as the ones used on the CZ3D? ( those pads take the slop out of the connection between the rods by turning the lock nuts.) Picked up this CZ7 where both the locking pads are missing. Already mailed fisher, no reply yet. Tried finding replacements online but no luck.

Petty sure they are all the same....
I have four different cz's
they all look the same.

I actually lost the insert locking cam on one of my detectors as well. And as of now don't have a cam lock I can salvage from an older detector rod.

You'll have to buy a new complete lock part set.
Whites, Minelab Camlock will work with a hole open modification,
try White's or Serious Detecting
[www.google.com]

DeepTech Vista X with 3 search coils.
Works for me

Excellent, thanks guys. Now at least i know what the part looks like. Might try to make that pad out of a piece of pvc pipe. Also have some other old minelab shafts laying around, perhaps i can 'MacGuyver' something out of those

Thick piece of pvc pipe and a dremel; 10 minutes later and a great pole locking pad was born