Best deep pasture machine ?

It has to be the Nox!

Away from iron patches? I'll take the Sovereign with a large coil like the 10 x 12 SEF.

Nice coin, but that photo hosting site is awful.

The Nox is my number one choice for just about every type of hunting these days.

DeepTech are deep seekers.

Anfibio and Equinox.

Deus by a mile for my area,9 inch coil alone is deepest out if all my machines.

Musky

For deep pasture detecting which was 'specifically' mention the my selection would be.

Nox with the 15'' coil gives good depth and possibly the best all round machine for the last 2-3 years or so.

TdI Pro 'PI' with my Coiltek 14x9 Mono coil also have many other larger coils for extreme depth if needed.

T2 with the SEF 15x12 or NEL BIG coil 17x15.

These are my prime deep pasture machine and not necessary my everyday machines.

I defo think the Nox is the best on picking out these little cut coins on old pastures upto the 7"-8" mark.
I find it very accurate in its audio on these targets and you can with at least with some confidence know the target is going to read the same out of the hole once dug.
With most other detectors I've used the ID/audio would be bouncing and giving such a scratchy mixed iron tone, you probably wouldn't dig it.

Seeing your pic Ghound reminds me of my first day out with bigger coil on Nox 800.
[www.youtube.com]

Did you find a cut Spanish that time?

coinspader - agreed on the Musketeer.



Edited 1 time(s). Last edit at 06/06/2021 06:47PM by pinpointer999.

For me its the F75 with boost followed by the Etrac and the Equinox

May e the Deus2 will be the new deep seeker, or maybe it doesn't get the big benefit in depth from a large coil just the same as the Nox doesn't.