Title edited- Video showing differences using Etrac comparing tones used

Assuming nothing wrong with my unit.
Users of etrac if this is indeed standard ops, users of Etrac may find this video very beneficial.

[m.youtube.com]



Edited 1 time(s). Last edit at 07/31/2022 09:00AM by tnsharpshooter.

David what you show is normal nothing wrong with the etrac .Going to long tone or smooth well hit the target (BECAUSE ) the detector is not resetting between targets normal and pitch hold reset between targets .
Long and smooth do not reset between targets they are a continuous signal one after another .So by going slower in normal and pitch hold well show target thereby giving the detector more time to reset between targets . sube

subey Wrote:
-------------------------------------------------------
> David what you show is normal nothing wrong with t
> he etrac .Going to long tone or smooth well hit th
> e target (BECAUSE ) the detector is not resetting
> between targets normal and pitch hold reset betwee
> n targets .
> Long and smooth do not reset between targets they
> are a continuous signal one after another .So by g
> oing slower in normal and pitch hold well show tar
> get thereby giving the detector more time to reset
> between targets . sube


Seems detector behavior changed some what at least when I added second coin. As far as giving nonferrous tone.
Wonder if same similar results would we've been witnessed had I added second nail vs second nonferrous coin?

Will look at this some more.



Edited 1 time(s). Last edit at 07/31/2022 09:07AM by tnsharpshooter.

Another video looking at Normal tones use.
[m.youtube.com]


Another video watching ferrous number increase as I add nonferrous coin to nail scenario.
[m.youtube.com]



Edited 2 time(s). Last edit at 07/31/2022 03:25PM by tnsharpshooter.