Teknetics G2 With 12X10 Sef coil Results

I put a S.E.F. 12x10 coil on my G2 today and here is the results over the standard 11x7 Coil Video will be uploaded later on Youtube.

G2 With 11X7 Coil 12X10 Sef
1949 Franklin Half Dollar ------ 7” 8.25
1946 Silver Quarter --------------- 7” 8.00
1944 Mercury Dime -------------- 5.5” 5.75
1945 War Nickel ------------------- 8.5 8.5
10.5 Gram Silver Ring ------------ 6.75 7.0
22k 1/10 gold coin 3.3g ---------- 6.5 7.0
14k 8.4g Ring------------------------ 9.25 10.0
14k 6.4g White Gold -------------- 8.0 9.0
14k 2g Engagement Ring -------- 7.0 8.0
10k 1.2g Garnet -------------------- 7.0 7.25
10k 1g Black Hill Gold ------------ 7.0 8.0
10k .7g Toe Ring -------------------- 6.0 6.5
1955 Wheat Penny ----------------- 6.5 6.5

In stock configuration........ only 5.5" on a dime? --- Not good.

Here is the video I promised
[www.youtube.com]

NASA-Tom Wrote:
-------------------------------------------------------
> In stock configuration........ only 5.5" on a
> dime? --- Not good.


I'm almost positeive that my G2, in stock mode, was air testing a dime at 11 or so inches. Greg, is your unit at full sensitivity???

I have a Gold Bug Pro I am going to try the same test on tomorrow. I did post a X-Terra Video also.

I tried it again and I got the pretty close to the same results using the Gold Bug Pro, this time I turned the coil sideways and tested the dime I got 6 1/2, I also have a Rosey burried at 7" and the G2 would not pick that up. Both coins where buried at the same time.
I hit a barrier on my coin dates 1965, I am going to try the GBpro where I found a Franklin. With the Sef.
I had good results with the 705 as you cam see in video.
[www.youtube.com]

SEF coils don't seem to perform to well. At least not that size. We always wonder if we got a badly wound coil when we get those results but when you see the performance repeated across mfgs you can pretty much tell it wasn't that one single coil.

HH
Mike

I'm pretty sure I get better results than that with the 5 inch coil

I got 8 inches with full power and no sens on a dime and ten on a 1965 penny sith the standard coil and a good ground bal

LowBoy

TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube

[www.youtube.com]

If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!

Here is a link on a T2 with a 15" coil

[www.youtube.com]

has anybody tried a 13" ultimate coil on the G-2 i heard there much better than the SEF coil?

AMC, you can find a couple of my posts here and several at FM, showing that I have been using the 13" Ultimate coil on my G2 for 3 months and I get about 2" increased depth in my mild soil.

overall do you really like it? do you think its worth the money?

I agree with sekypaleo , I find the 13 easy to swing and deeper than stock although i have not hunted as much
as i like this season.
My GB SE can hit a nickle at over 10 inches with 5 X 10 coil and over 11 inches with the 13
with Disc of 30 max Sens . a Merc around 10 inches

If in All Metal i can go off the paper with the 5 x 10 and a nickle, and a easy 13 plus with the 13 inch coil

well i'm all set with that coil i got one brand new, haven't even tried it yet, plus i got the 5" coil but winter has taken over here in Maine.