Welcome!
» Log In
» Create A New Profile
Home
>
Thomas Dankowski Metal Detecting Forum
>
Topic
Just did a software update on the Impact
Posted by Lawrenzo
This forum is currently read only. You can not log in or make any changes. This is a temporary situation.
|
Just did a software update on the Impact February 20, 2017 03:39AM |
Registered: 17 years ago Posts: 3,980 |
It went quickly maybe a minute with no flaws.
LowBoy
TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube
[www.youtube.com]
If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!
LowBoy
TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube
[www.youtube.com]
If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!
|
Re: Just did a software update on the Impact February 20, 2017 10:12AM |
Registered: 17 years ago Posts: 1,044 |
Does it have deep mode now with 3 or 4 tones?
____________________________________________________________________________________________________________
In a democracy, it is difficult to win fellow citizens over to your own side, or to build public support to remedy injustices that remain all too real when you fundamentally misunderstand how they see the world.
____________________________________________________________________________________________________________
In a democracy, it is difficult to win fellow citizens over to your own side, or to build public support to remedy injustices that remain all too real when you fundamentally misunderstand how they see the world.
|
Re: Just did a software update on the Impact February 20, 2017 02:40PM |
Registered: 10 years ago Posts: 1,194 |
Is the update process Windows/PC only, or are Macs supported?
Pleasant Garden, NC
AT Max, Nokta Impact, MX Sport, Nokta FORS Relic, GPX 4800, Infinium, Racer, Deus, F75SE, Nautilus DMC II (order of acquisition, last to first)
Does an archeologist argue with a plow? A bureaucrat with a bulldozer?
Pleasant Garden, NC
AT Max, Nokta Impact, MX Sport, Nokta FORS Relic, GPX 4800, Infinium, Racer, Deus, F75SE, Nautilus DMC II (order of acquisition, last to first)
Does an archeologist argue with a plow? A bureaucrat with a bulldozer?
|
Re: Just did a software update on the Impact February 20, 2017 04:51PM |
Registered: 17 years ago Posts: 3,980 |
I have a PC and it worked not sure about a apple they don't give much info on that subject.
1) Auto Ground Balance – 00-90 in COG mode 20-90 in other modes
2) We have increased the timeout in settings / expert settings to 8 seconds
3) FD/Save - left button for FD, right button for Save
4) THIS IS AN IMPORTANT CHANGE – WE HAVE ADDED ID NORMALIZATION TO THE DEVICE WITH FREQUENCY CHANGE. PULLING THE TRIGGER AND PRESSING THE LEFT BUTTON WILL TURN ON /OFF NORMALIZATION.
5) IDs WILL COME NORMALIZED AT FACTORY DEFAULTS.
6) Tone Break points have been restricted at the next tone break point.
7) LCD backlight values for 1,2,3,4 and C1,C2,C3,C4 have been increased.
8) GEN mode threshold value has been set to 55 same as GEN D.
9) Screen will light up at GB and Pinpoint.
10) Pinpoint has been calibrated for depth reading.
LowBoy
TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube
[www.youtube.com]
If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!
1) Auto Ground Balance – 00-90 in COG mode 20-90 in other modes
2) We have increased the timeout in settings / expert settings to 8 seconds
3) FD/Save - left button for FD, right button for Save
4) THIS IS AN IMPORTANT CHANGE – WE HAVE ADDED ID NORMALIZATION TO THE DEVICE WITH FREQUENCY CHANGE. PULLING THE TRIGGER AND PRESSING THE LEFT BUTTON WILL TURN ON /OFF NORMALIZATION.
5) IDs WILL COME NORMALIZED AT FACTORY DEFAULTS.
6) Tone Break points have been restricted at the next tone break point.
7) LCD backlight values for 1,2,3,4 and C1,C2,C3,C4 have been increased.
8) GEN mode threshold value has been set to 55 same as GEN D.
9) Screen will light up at GB and Pinpoint.
10) Pinpoint has been calibrated for depth reading.
LowBoy
TAKE A LITTLE TIME KICKBACK AND WATCH SOME OF MY DETECTING VIDEO'S BELOW ON YouTube
[www.youtube.com]
If you don’t dig it, then how are you going to know what you’re missing!
How can you have your pudding if you don’t eat your meat!