One other thing I thought the CZ3D did not air test Well.

On this depth test you guys say you are getting 11 and 12 inches on is that in Enhanced mode and in the air????????? Thanks Jerry aka Tinfoil

Try this, and look at pages after page 12

[www.dankowskidetectors.com]

Keep in mind you should be air testing with a dime. enhanced is fine.

Set your sensitivity at 4 3/4 to start. ou can play with your sens from there as you air test the dime. You realize you will see max results in real world dirt?

The halo effect will enhance depth.

There is also a test to see if your CZ3D is calibrated properly. You will be able to read about that in the thread link i provided.

Ken



Edited 1 time(s). Last edit at 03/16/2009 12:24AM by Kas.

at a sensitivity of 4.8 with ground balance at 10, a quarter around 16 inches...it's ridiculous

Thanks Kas. Christopher, yours is hot! (Read = 'proper'!)

Thanks I found it. HH Jerry aka Tinfoil