Question about ground balancing the F75 ltd

I read that you can manually adjust the numbers to the positve (1-3 numbers higher than fastgrab) and that helps with false signals. I noticed you have to go to all metal
to manually adjust the ground balance, does that change carry over to the disc mode? One more thing, if I turn the sensitivity up while hunting to I need to re-ground balance?


Thanks for the help
Aaron



Edited 1 time(s). Last edit at 09/29/2010 09:06AM by gates21.

Yes. What ever you manually do to the Grnd Bal......it will carry over into the other modes.

USUALLY........you do not have to re-Grnd Bal if you increase/decrease Sensitivity. If your specific dirt is a Grnd Bal of say; '56'.........it should remain a '56' (because the dirt/mineralization does not change) as you increase/decrease sensitivity. It is still recommended to frequently check Grnd Bal.......especially if you can see a terrain and/or color change in the dirt being detected.